Application of carboxymethyl cellulose

Mix sodium carboxymethyl cellulose(CMC) with water directly to prepare paste glue for use. When dispensing sodium carboxymethyl cellulose glue, please add a certain amount of water in the batching tank with mixing equipment first.

In the case of available mixing equipment, scatter sodium carboxymethyl cellulose slowly and evenly into the batching tank and keep mixing so that sodium carboxymethyl cellulose and water are thoroughly mixed and sodium carboxymethyl cellulose is fully melted. Judgment of mixing time is based on the following. When sodium carboxymethyl cellulose is evenly dispersed in water and there are no apparent lumps, you can stop mixing and let sodium carboxymethyl cellulose and water stand. In this case, they will soak into each other and intermix with each other.

Firstly, sodium carboxymethyl cellulose and sugar, and other quality materials are mixed in a dry way and then poured into water to dissolve. During the operation, sodium carboxymethyl cellulose and sugar, and other materials are first put into the stainless steel mixer in a particular proportion. The top cover of the mixer is closed. Then the materials are kept sealed in the mixer. Then, the mixer is opened to mix the sodium carboxymethyl cellulose and other materials. Then the mixed sodium carboxymethyl cellulose mixture is slowly and evenly sprinkled into the mixing tank containing water and mixed continuously.

When using sodium carboxymethylcellulose in liquid or pulp food products, the mixture is homogenized to obtain more acceptable alignment and stability. The pressure and temperature used in the homogenization process should be determined by the characteristics of the material and the quality requirements of the product.